Simulation of chemical and technological processes of a hydrocarbon preparation plant

Authors

  • O. O. Liaposhchenko Sumy State University; 2, Rymskogo-Korsakova Str., Sumy, 40007, Ukraine
  • V. F. Moiseev National Technical University «Kharkiv Polytechnic Institute»; 2, Kyrpychova Str., Kharkiv, 61002, Ukraine
  • V. M. Marenok Sumy State University; 2, Rymskogo-Korsakova Str., Sumy, 40007, Ukraine
  • O. M. Khukhryanskyy Private JSC“ UKRHIMPROEKT”; 13, Illinska St., Sumy, 40009, Ukraine
  • O. Ye. Starynskyy Sumy State University; 2, Rymskogo-Korsakova Str., Sumy, 40007, Ukraine
  • V. V. Kovtun Sumy State University; 2, Rymskogo-Korsakova Str., Sumy, 40007, Ukraine

DOI:

https://doi.org/10.31471/2311-1399-2019-1(11)-7-13

Keywords:

computer simulation, low-tonnage, propane-butane, separator, throttle effect.

Abstract

This article presents a low-tonnage oil and gas processing plant (OGPP-20), its main process equipment and the operating principle. Three methods for producing a liquefied propane-butane fraction and designs of the equipment for its implementing are proposed: compression and condensation, compression and further throttling which allows the compressed gas cool to lower temperatures and rectification. The results of numerical studies of the methods of producing liquefied propane-butane in the Aspen HYSYS program for the thermodynamic model of Peng–Robinson substantiate the method of obtaining the liquefied propane-butane fraction and its design.

Downloads

Download data is not yet available.

References

Pankrushina, AV & Gartman, TN 2017, 'Process design of complex systems of rectification columns and the evaluation of their effectiveness with the assumption of the range of feed composition', Theor Found Chem Eng, 51:858–866. https://doi.org/10.1134/s0040579517050177.

Meiri, N, Radus, R & Herskowitz, M 2017,'Simulation of novel process of CO2 conversion to liquid fuels', J CO2 Util, 17:284–289. https://doi.org/10.1016/j.jcou.2016.12.008.

Valentínyi, N & Mizsey, P 2014, 'Comparison of pervaporation models with simulation of hybrid separation processes', Period Polytech Chem Eng, 58:7–14. https://doi.org/10.3311/PPch.7120.

Abdelaziz, OY, Hosny, WM, Gadalla MA, et all 2017, 'Novel process technologies for conversion of carbon dioxide from industrial flue gas streams into methanol', J CO2 Util, 21:52–63. htps://doi.org/10.1016/j.jcou.2017.06.018.

Chisalita, DA, Petrescu, L, Cormos, AM & Cormos, CC 2018, 'Assessing Energy and CO2 Emission Reduction from Ammonia Production by Chemical Looping as Innovative Carbon Capture Technology', Elsevier Masson SAS.

Dibyo, S, Sunaryo, GR, Bakhri, S, et all 2018, 'Analysis on Operating Parameter Design to Steam Methane Reforming in Heat Application', RDE. J Phys Conf, Ser 962. https://doi.org/10.1088/1742-6596/962/1/012052.

Fricke, A & Schöneberger, JC 2017, 'A Blueprint for Software Architectures in Process Optimization', Chemie-Ingenieur-Technik, 89:515–526. https://doi.org/10.1002/cite.201600130

Haaz, E & Toth, AJ 2018, 'Methanol dehydration with pervaporation: Experiments and modelling', Sep Purif Technol, 205:121–129. https://doi.org/10.1016/j.seppur.2018.04.088

Szima, S & Cormos, CC 2018, 'Improving methanol synthesis from carbon-free H2 and captured CO2: A technoeconomic and environmental evaluation', J CO2 Util, 24:555–563. ttps://doi.org/10.1016/j.jcou.2018.02.007.

Al-Mhanna, N 2018, 'Simulation of High Pressure Separator Used in Crude Oil Processing', Processes, 6:219. https://doi.org/10.3390/pr6110219.

Downloads

Published

2019-06-24

How to Cite

Liaposhchenko, O. O. ., Moiseev, . V. F., Marenok, . V. M., Khukhryanskyy, . O. M., Starynskyy, O. Y., & Kovtun, V. V. (2019). Simulation of chemical and technological processes of a hydrocarbon preparation plant. JOURNAL OF HYDROCARBON POWER ENGINEERING, 6(1), 7–13. https://doi.org/10.31471/2311-1399-2019-1(11)-7-13

Issue

Section

OIL AND GAS EXPLORATION AND PRODUCTION