Development of non-marking tubular holding equipment

Authors

  • B.V. Kopey, M.M. Liakh, Yu.M. Liakh, V.V. Mykhailiuk

Keywords:

non-marking equipment, pipe, thread connection, tripping operations, wedge gripper.

Abstract

The article gives the recommendations of a technical solution for preventing the destruction of external surfaces of drill and
casing pipes by wedge grippers in the process of performing descending-lifting operations. Also, a constructive solution to
clamping the surface of the pipes during screwing or unscrewing of thread connections is proposed. The research of proposed
technical solutions of grippers using computer models has been carried out. The main parameters of the design elements of the
proposed wedge gripper and clamp are established, which can provide the technological process without destroying the outer
surfaces of the pipes of the oil assortment.

Downloads

Download data is not yet available.

References

[1] Kopey, BV & Kopey, VB 2010, Sucker rods for
pumping units, IFNTUOG, Ivano-Frankivsk. (in Ukrainian).
[2] Kopey, BV, Maksymuk, ОV, Shcherbyna, NМ 2003,
Sucker rods and pipes made of polymer composites, IAPMM
NAS Ukraine, Lviv. (in Ukrainian).
[3] Panasyuk, VV (ed. in chief) 2006, Fracture
mechanics and strength of materials. Reference manual, Kyiv,
Naukova dumka; V.10: Strength and longevity of oil and gas
equipment, Karpenko FMI of the NAS Ukraine, IFNTUOG,
Lviv-Ivano-Frankivsk. (in Ukrainian).

Downloads

Published

2018-06-06

How to Cite

V.V. Mykhailiuk, B. K. M. L. Y. L. (2018). Development of non-marking tubular holding equipment. JOURNAL OF HYDROCARBON POWER ENGINEERING, 4(1), 18–25. Retrieved from https://ogpe.nung.edu.ua/index.php/jhpe/article/view/47

Issue

Section

OIL AND GAS EXPLORATION AND PRODUCTION