Determination of the rheological properties of drilling fluids from rotational viscometry data
DOI:
https://doi.org/10.31471/2311-1399-2020-2(14)-31-45Keywords:
biviscosity fluids, Couette flow, equation of state, maximum principle of likelihood function, multi-criteria analysis, rheologically stationary model.Abstract
The method of rotational viscometry data processing, which is based on the maximum likelihood function principle is considered. The method takes into account the informative content of experiments and is built on the strict solution of the Couette flow equation in a viscosimeter gap. The class of models is formed from rheologically stationary (including viscosity) models. A generalization of the model for processing the experimental plan data with the aim of building equations of the state of the rheological properties of variable factors is considered. A multicriterial interpretation of estimates of the rheological model and properties of liquids has been proposed. Illustrative examples of estimating rheological properties building of drilling fluids and their equations of state are given.
Downloads
References
Caenn R, Darley HCH, Gray GR: Composition and Properties of Drilling and Completion Fluids (Seventh). Elsevier, 2011; https://doi.org/10.1016/C2009-0-64504-9
Lavrov A, Torsaeter M. Physics and Mechaniks of Primary Well Cementing. Springer, 2016.108 p.
Andaverde J, Wong-Loya JA, Vargas-Tabares Y, Robles-Perez M. A practical method for determining the rheology of drilling fluid. Journal of Petroleum Science and Engineering. 2019; 180; https://doi.org/10.1016/j.petrol.2019.05.039
Hu Youlin, Yue Qiansheng, Liu Shujie et al. Research on deepwater synthetic drilling fluids and its low temperature rheological properties. Petroleum Science. 2011; 8; https://DOI.10.1007/s12182-011-0165-6
Myslyuk MA, Bogoslavets VV, LubanYuV et al. Study of the rheological properties of Biocar biopolymer system.Construction of Oil and Gas Wells on-Land and off-Shore.2015; 8.pp. 31– 36.
Wang Fuhua, Tan Xuechao, Wang Ruihe et al. High temperature and high pressure rheological properties of high-density water-based drilling fluids for deep wells.Petroleum Science. 2012; 9; https://DOI10.1007/s12182-012-0219-4
Zhou HB, Wang G, Fan HH et al. A novel prediction model for rheological properties of drilling fluids at HTHP conditions and its evaluation.Socar Proceedings.2015; 2.pp. 13–22.
Newton I. Mathematical Principles of Natural Philosophy. 1686.
Bingham EC. Fluidity and Plasticity, McGraw-Hill, NewYork (1922).
Ostwald W. Veber die Geschwindigkeitsfunktion derViskositat Disperser Systeme. Kolloid Z. 1925; 36. pp. 99‒117.
Herschel WH, Bulkley R. Konsistenz messungen von Gummi-Benzollösungen. Kolloid Z. 1926; 39. pp. 291–300.
Schulman ZP. Proceedings of the 3rd All-SovietUnion seminar on heat and mass transfer10 (1968).
Robertson RE, Stiff HA. An improved rheological model for relatings hear stress to shear rate in drilling fluids and cement slurries. Soc. Pet. Eng. J. 1976; 16 (1). pp. 31–36.
Myslyuk MA & Salyzhyn IM. The evaluation of biviscosity fluids rheological properties on the basis of rotational viscometry data. Oil Industry. 2008; 12. pp. 40‒42.
Nasiri M &Ashrafizadeh SN. Novel equation for the prediction of rheological parameters of drilling fluids in an annulus. Industrial and Engineering ChemistryResearch. 2010; 49(7); https://doi.org/10.1021/ie9009233
Binh T. Bui & Azra N. Tutuncu.A Generalized Rheological Model forDrilling Fluids with Cubic Splines. SPE Drilling & Completion. 2015. pp. 1–14.
Myslyuk MA.Determining rheological parameters for a dispersion system by rotational viscometry. Journal of Engineering Physics and Thermophysics.1988; 54(6). pp. 655– 658.
Myslyuk MA & Salyzhyn IM. Evaluation of barothermal conditions influence on rheological properties of drilling muds. Construction of Oil and Gas Wells on-Land and off-Shore. 2007; 4. pp. 44‒47.
Myslyuk M & Salyzhyn I. The evaluation of rheological parameters of non-Newtonian fluids by rotational viscosimetry. Applied Rheology. 2012; 22(3); https://DOI:10.3933/ApplRheol-22-32381
Golubev DA. Construction of true rheoloogical curves on the basis of rotational viscosimetry data. Oil Industry.1979; 8. pp.18‒21.
Myslyuk MA, Vasylchenko AA, SalyzhynYuM, Kusturova EV. Evaluation of rheological properties of drilling muds from the rotational viscosimetry data. Construction of Oil and Gas Wells on-Land and off-Shore. 2006; 12. pp. 29‒33.
Kelessidis VC & Maglione R. Shear Rate Corrections for Herschel-Bulkley Fluids in Couette Geometry. Appl. Rheol. 2008; 18. 34482.
Salyzhyn I & Myslyuk M. Studies of the rheological properties of drilling fluids. Annual Transaction of the Nordic Rheology Society. 2011; 19. pp. 61‒67.
Kelessidis V, Maglione R, Tsamantaki C, Aspirtakis Y. Optimal determination of rheological parameters for Herschel–Bulkley drilling fluids and impact on pressuredrop, velocity profiles and penetration rates during drilling. Journal of Petroleum Science and Engineering. 2006; 53(3–4); https://doi.org/10.1016/j.petrol.2006.06.004
Kelessidis VC & Maglione R. Modeling rheological behavior of bentonite suspensions as Casson and Robertson-Stiff fluids using Newtonian and true shear rates in Couette viscometry. Powder Technology. 2006; 168(3); https://doi.org/10.1016/j.powtec.2006.07.011
Myslyuk MA. On the interpretation of drilling fluids rotational viscometry data. Oil Industry. 2018; 10; https://doi.10.24887/0028-2448-2018-10-50-53
Myslyuk MA. Determination of Rheological Properties of Drilling Fluids by Rotational Viscometry Data. SOCAR Proceedings. 2019; 4; http://dx.doi.org/10.5510/OGP20190400404
Downloads
Published
How to Cite
Issue
Section
License
Copyright Notice
1.png)
1.png){kind=logo}
