Technologies of cleaning and in-line inspection of gas mains

Authors

  • Yu. V. Banakhevych

DOI:

https://doi.org/10.31471/2311-1399-2020-1(13)-16-25

Keywords:

in-line inspection; technical diagnostics of gas mains; technical monitoring and nondestructive testing of gas mains.

Abstract

In-line inspection of pipe metal is an extremely important component of technical diagnostics of gas mains. The main objective of inspection is determining the actual technical condition of gas pipeline and its equipment with subsequent repair of detected defects to ensure reliable operation of the facility. Untimely diagnostics and repair operations lead to higher failure rate and emergencies. Regular diagnostics makes it possible to determine effectively the technical condition and allows establishing the expediency of further operation and recommendations for the elimination of detected defects.

Downloads

Download data is not yet available.

References

Kryzhanivskyi, YeI & Nykyforchyn, GM 2011, ‘Bulk Damage of Long-Term Operated Main Gas Pipelines:The Role of Corrosive-Flood Environment’, Scientific notes, no 31, pp. 177–181. (in Ukrainian)

Rules for safe operation of main gas pipelines. NPAOP 60.3-1.01-10: State Normative Acts on Labor Protection: approved ... 27.01.2010 no 11. The State Committee of Ukraine for Industrial Safety, Labor Protection and Mountain Supervision. Kharkiv, Industry. 2010. p. 126.

On pipeline transport: Law of Ukraine of 15.05.1996, No 192/96-VR. Bulletin of the Verkhovna Rada of Ukraine. 1996. no. 29, p. 139. (in Ukrainian)

Kovalko, MP 2001, Methods and means of improving the efficiency of gas pipeline transport systems, Ukrainian encyclopedic knowledge, Kyiv, p. 288. (in Urainian)

Banakhevych, YuV & Banakhevych, RYu 2019, ‘Defects Identification of Main Gas Pipelines’, Journal of Hydrocarbon Power Engineering, vol. 6, iss. 1. pp. 22–29.

Rozgonyuk, VV 2001, Handbook of a gas transportation enterprise specialist, Naftogaz of Ukraine, Ukrtransgaz JSC, Rostock, Kyiv, 1091 p. (in Ukrainian)

Grudz, VYa, Grudz, YaV, Kostiv, VV [et al.] 2012, Technical Diagnostics Of Pipeline Systems: monograph, Lileya-NV, Ivano-Frankivsk, 512 p. (in Ukrainian)

Reiter, PM, Karpash, OM [et al.] 2014, Natural Gas: Innovative Solutions for Sustainable Development: monograph, IFNTUOG, Ivano-Frankivsk, 398 p. (in Urainian)

Banakhevych, YuV & Banakhevych, RYu 2013, ‘Experience of identification of detected defects by in-line diagnostics in SC Ukrtransgaz’, Technical diagnostics and non-destructive testing, no 2, pp. 40–46. (in Ukrainian)

SSU 49.5-30019801-135:2016. Gas Mains. In-line diagnostics. PJSC Ukrtransgaz, 2016, 130 p. (in Ukrainian)

SNiP 2.05.06-85. Trunk pipelines, Gosstroy of the USSR, Moscow, 1985, 52 p. (in Russian)

Kychma, AO 2001, ‘Assessment of defects in pipe metal based on the results of in-line inspection of pipelines’, Bulletin of Lviv Polytechnic National University, no. 434:

Dynamics, Strength and Design of Machines and Instruments. pp. 58–61. (in Ukrainian)

Building Standards of Ukraine В.3.1-00013741-07:2007. Trunk oil pipelines. Repair method for defective areas, Ministry of Fuel and Energy of Ukraine, Kyiv, 2007, 114 p. (in Ukrainian)

STO GAZPROM 2-2.3-112-2007. Methodological guidelines for assessing the performance of sections of gas mains with corrosion defects, VNIIGAZ, Moscow, 72 p. (in

Russian)

STO GAZPROM 2-2.3-173-2007. Instructions for the comprehensive examination and diagnostics of gas mains subject to stress corrosion cracking, IRTs Gazprom, Moscow, 56 p. (in Russian)

Kharchenko, EV, Klysz, S, Palyukh, VM, Kunta, OE & Lenkovs’kyi, TM 2017, ‘Influence of the Long-Term Operation of Gas Pipelines on the Cyclic Crack-Growth Resistance of 17G1S Steel’, Materials Science, vol. 52, no 6. pp. 827–833.

Banakhevych, YuV, Banakhevych, RYu, Dragilev, AV & Kychma, АО 2014, ‘Static Strength Evaluation of Pipelines Sections with Crack-Like Defects in the Weld Zone’, Journal of Hydrocarbon Power Engineering, vol. 1, iss. 2. pp. 96–102.

Osadchuk, VA, Banakhevych, YuV & Ivanchuk, AA 2006, ‘Determination of the stress state of main pipelines in the zone of circular welded seams’, Physical and chemical mechanics of materials, 42, no. 2, pp. 99–104.

Banakhevych, YuV, Dragilev, VA & Banakhevych, RYu 2017, ‘The system of integrity management of the objects of gas mains of PJSC "Ukrtransgaz"’, Oil and Gas Power Engineering 2017: int. scientific and technical. conf., Ivano-Frankivsk, 15–19th of May 2017, pp. 208–211. (in Ukrainian)

Grudz, VYa, Tymkiv, DF, Mykhalkiv, VB & Kostiv, VV 2009, Maintenance and repair of gas pipelines: monograph, Lileya-NV, Ivano-Frankivsk, 711 p. (in Ukrainian)

Downloads

Published

2020-06-29

How to Cite

Banakhevych, Y. V. (2020). Technologies of cleaning and in-line inspection of gas mains. JOURNAL OF HYDROCARBON POWER ENGINEERING, 7(1), 16–25. https://doi.org/10.31471/2311-1399-2020-1(13)-16-25