Corrosion resistance of epoxy composite coatings for the transport industry in aggressive environments

Authors

  • А. V. Buketov
  • O. M. Bezbakh
  • N. M. Buketova
  • T. I. Ivchenko
  • D. V. Zhytnyk
  • K. M. Klevtsov

DOI:

https://doi.org/10.31471/2311-1399-2020-1(13)-26-30

Keywords:

anti-corrosion properties; coating; discrete fibers; epoxy composite; filler.

Abstract

Epoxy diane oligomer ED-20, 2,4-diaminoazobenzene-4'-carboxylic acid modifier, polyethylene polyamine hardener,microdispersed particles of synthesized powder charge and a mixture of discrete fibers were used to form composite materials and protective coatings for the transport industry. The influence of aggressive media: oil, gasoline, sea water, acetone, NaOH (50 %), HCl (10 %) and H2SO4 (10 %) on the corrosion resistance of the developed composite materials with different content of ingredients was studied. The results of experimental studies suggest that the least swelling was observed for samples of composite containing components in the following ratio – modified binder: microdisperse filler in the form of a synthesized powder charge (Fe (70 %) + Ti (10 %) + TiC ) + Fe3C (5 %)) (d = 10–12 mm) : mixture of discrete fibers (modal (42 %), polyacrylic (38 %), polyamide (38 %)) – 100 : 0.05 : 0.10. The use of such a composite in the form of protective coatings of vehicles will ensure (if compared to the modified epoxy matrix) reduction of the permeability of aggressive media in: 1.5–1.7 times (when being used in oil and gasoline); 1.6–1.8 times (when being used in seawater, acetone and NaOH solution (50 %)); 3.0 and 2.5 times (when being used in solutions (10 %) of hydrochloric and sulfuric acids, respectively. Increased corrosion resistance compared to the matrix is caused by a decrease of the amount of polymer in the developed material and its increased cohesion strength, which increases the path of penetration of molecules of corrosive agents during their diffusion into the composite due to additives.

Downloads

Download data is not yet available.

References

Palraj, S, Selvaraj, M, Maruthan, K & Rajagopal, G 2015, ‘Corrosion and wear resistance behavior of nano-silica epoxy composite coatings’, Progress in Organic Coatings,

vol. 81, pp. 132–139, 2015.

Shanmugam, D, Nguyen, T & Wang, J 2008, ‘A study of delamination on graphite/epoxy composites in abrasive waterjet machining’, Composites Part A, vol. 39, no. 6, pp. 923–929, 2008.

Yu, Yi-hsiuan, Chen-chi, MMa, Chih-chun, Teng, Yuan-li Huang, Hsi-wen, Tien, hie-heng, Lee & Ikai, Wang 2013, ‘Enhanced Thermal and Mechanical Properties of

Epoxy Composites Filled with Silver Nanowires and Nanoparticles’, Journal of the Taiwan Institute of Chemical Engineers, 44 (4): 654–59. https://doi.org/10.1016/j.jtice.2013.01.001.

Brooker, RD, Kinloch, AJ & Taylor, AC 2010, ‘The Morphology and Fracture Properties of Thermoplastic-Toughened Epoxy Polymer’, The Journal of Adhesion, 86(7), 726–741. https://doi.org/10.1080/00218464.2010.482415

Salom, C, Prolongo, MG, Toribio, A, Martínez-Martínez, AJ, de Cárcer, IA & Prolongo, SG 2018, ‘Mechanical properties and adhesive behavior of epoxygraphene nanocomposite’, International Journal of Adhesion and Adhesives, 84, 119–125. https://doi.org/10.1016/

j.ijadhadh.2017.12.004

Duleba, B, Greškovič, F, Dulebová, Ľ & Jachowicz, T, 2015, ‘Possibility of Increasing the Mechanical Strength of Carbon/Epoxy Composites by Addition of Carbon Nanotubes’, Materials Science Forum, 818, 299–302. https://doi.org/10.4028/www.scientific.net/MSF.818.299

Practical guide on chemistry and physics of polymers / Ed. by M.A. Kurenkova, Chemistry, Moscow, 1995. (in Russian)

Vorobyova, VA 1975, Corrosion resistance of materials in aggressive environments of chemical production, Chemistry, Moscow. (in Russian)

Buketov, AV, Bezbach, OM, Krugly, DG, Buketova, NG & Yatsyuk, VM 2019, ‘Investigation of thermophysical properties of modified 4,4'-methylenebis (2-methoxyaniline) epoxy composites for the transport industry’, Scientific notes of Lutsk LNTU, Iss. 66, p. 23–29. (in Ukrainian)

Buketov, AV, Syzonenko, OМ, Bezbakh, ОМ, Torpakov, AS & Lypian, YeV 2019, ‘Study of the effect of synthesized high voltage electric charge of a powder mixture on the physical and mechanical properties of epoxy composites for the transport industry’, Journal of Hydrocarbon Power Engineering, vol. 6, iss. 2, p. 64–70.

Buketov, AV, Kulinich, VG, Smetankin, SA, Buketova, NG & Yatsyuk, VM 2019, ‘Influence of C13H12CL2N2TA C13H14N2 modifiers on mechanical properties of epoxy matrix’, Scientific notes of Lutsk LNTU, iss. 66, p. 37–45. (in Ukrainian)

Buketov, AV, Sapronov, ОО, Skirdenko, VO, Alekseenko, VL & Skirdenko, ОІ 2016, Epoxy composites modified with high-frequency pulsed magnetic field: monograph, KhSMA, Kherson. (in Ukrainian)

Downloads

Published

2020-06-29

How to Cite

Buketov А. V., Bezbakh, O. M., Buketova, N. M., Ivchenko, T. I., Zhytnyk, D. V., & Klevtsov, K. M. (2020). Corrosion resistance of epoxy composite coatings for the transport industry in aggressive environments. JOURNAL OF HYDROCARBON POWER ENGINEERING, 7(1), 26–30. https://doi.org/10.31471/2311-1399-2020-1(13)-26-30